RiSC-SOM Evaluation Board

Introduction

RiSC-SOM  Evaluation Boards are designed to be a flexible development environment to explore the functionality and performance of Intel/Marvell XScale® based RiSC-SOM  Modules.
RiSC-SOM  Evaluation Boards are fitted either with a RiSC-SOM  XScale® PXA270 312MHz / 520MHz (Bulverde) module or a RiSC-SOM  XScale® PXA320 806MHz (Monahans) module, or a RiSC-SOM  XScale® PXA300 206MHz (Monahans) module.

User Interface

RiSC-SOM  Evaluation Boards provide an analog VGA connector to interface directly to a CRT or TFT screen by providing a generic LCD connector. RiSC-SOM  Modules also have the ability to drive almost every TFT panel. A special connector for the Philips LB064V02-A1 TFT is integrated on the Evaluation Board.
Keyboard and mouse can be attached through PS/2 connectors or the USB port. RiSC-SOM  Evaluation Boards also provide switches, buttons and LEDs for simple user interaction.
Audio input and output is available on standard jacks.

RiSC-SOM  Extensions

All interfaces of RiSC-SOM  Modules are designed to be easily accessible by any external hardware. For the most common interfaces, the required hardware and standard connectors are already integrated. A list of ready-to-use interfaces can be found in the feature summary box on the right of this page.
The entire 32Bit bus of the PXA270 is accessible through an extension connector. The same applies for the 16Bit bus of the PXA320 and PXA300.
On-Board DC/DC converters deliver up to 5 Amps at 5V and 3.3V for additional hardware.

Price(US$)

CPU Modules:
RiSC-SOMs

Software
Preinstalled WinCE 5.0/6.0
on RiSC-SOM Modules

Interfaces:
10/100 MBit Ethernet
USB Host
USB Host / Device
2 x PS/2
Analog VGA
Generic LCD Connector
TFT: Philips LB064V02–A1
Line–In, Line–Out, Mic–In
IrDA
2 x RS232
CAN (Philips SJA1000)
SDCard
Compact Flash
Power Supply:
Required Input:
7-24VDC, 3-50W
On-board Converter:
3.3V, max 5A
5V, max 5A

Size:
200 x 200 mm